DRY LOCATION
1 OF 2
IG121815-3.0
®
12V
DC
INSTALLATION GUIDE
CLICKTIGHT
®
PRO
24V
DC
CLICKTIGHT
®
PRO
INSTALLATION GUIDE
SAFETY & WARNINGS
SUPPLIED ACCESSORIES
TOOLS FOR INSTALL
INSTALLATION
1
PREPARE WIRE AND ATTACH SPADE CONNECTORS.
COMPATIBLE LED TAPE LIGHTS
CLICKTIGHT PRO is compatible with most Diode LED
solid color
2-channel
12V and 24V tape lights. See product page for a full list.
a. Determine wire gauge (22 - 18AWG). Strip wires.
MAIN POWER MUST BE TURNED
OFF BEFORE INSTALLATION.
12VDC
60W
5A
24VDC
100W
4.17A
DO NOT EXCEED CLASS 2 LIMIT
WHEN LOADING CLICKTIGHT.
CORRECT -
CUT TAPE LIGHT SO
FOUR CONTACT/SOLDER POINTS
REMAIN TO ALLOW FOR GAP
BETWEEN PRONGS AND LED.
INCORRECT -
DO NOT ALLOW
CLICKTIGHT PRONGS TO TOUCH
LED CHIP CONTACTS WHEN LED
TAPE IS INSERTED.
Tape-To-Wire Kit: DI-CKTP-TTW-10
A. CLICKTIGHT PRO Tape-To-Wire Connector (10)
B. Spade Connector - 22AWG - 18AWG (25)
C. Tape Light Fastener (10) & Screws (20)
D. Wire Fastener (10) & Nails (10)
•
Small Phillips-head screwdriver
•
Wire Stripper / Crimper
•
Scissors
•
Hammer
A.
B.
C.
D.
Tape-To-Tape Kit: DI-CKTP-TTT-5
A. CLICKTIGHT PRO Tape-To-Tape Connector (5)
B. Tape Light Fastener (10) & Screws (20)
A.
B.
3/8 in.
(10 mm)
b. Attach spade connectors with crimper tool.
Fit in crimper tool
notch. Squeeze to
secure wire.
ATTACH WIRE TO CLICKTIGHT
2
FOR BLAZE LED TAPE LIGHT
!
!