IPLoA-MESH-PLC-W_Quick Start Guide_2017-11-20_Draft_2
1
2
4
3
6
5
7
8
IPLoA-MESH-PLC-W
Package Contents
Quick Start Guide
Overview
IPLoA-MESH-PLC-W User Guide
Technical information on DKT
HomeMesh family
1 pieces
IPLoA-MESH-PLC-W
You can now scan and connect to the Guide SSID, the default
Guide SSID is printed on the label of each IPLoA-MESH-
PLC-W.
The Power line diode will then shift
to Amber. Thats means that the unit
is ready for pairing with other units.
If the IPLoA-MESH-PLC-W can access
3rd party gateway or your Router
then the LAN LED will be Green slow
blinking (95% on/5% off).
The Wi-Fi LED should be Amber. That
means the Guide SSID is enabled.
Quick Start Guide
1 pieces
Installation of first unit
Installation of first unit...
Installation of first unit...
Installation of first unit...
Power Diode
LAN
Wi-Fi
1 x Gigabit Ethernet Ports
Pairing/Reset Button
Power Plugg (100V-240V~, 50/60Hz)
PDS Cable
(Ethernet)
All diodes will light up in
green for about 1 minute.
Router,
GateWay or
Modem
3.8s
on
0.2s
off
Amber
If the IPLoA-MESH-PLC-W can NOT access 3rd
party gateway or your Router then you are
not able to access the unit to complete the
installation.
Please see Troubleshooting guide.
