WIRELESS REPEATER KIT
DoorKing Part Number
2364-080
The wireless repeater kit extends the wireless communication range between an access control system and wireless tracker expansion board or
just between wireless tracker expansion boards. It gets installed between the wireless systems that are too far or obstructed from each other to
reliably communicate with each other. It will repeat a signal sent to it and relay that signal to the next wireless system. Multiple repeaters can be
used in the same communication line of tracker expansion boards. The approximate signal range is 500 ft direct-line-of-sight with no signal
interference.
Power Transformer
See back page.
IMPORTANT:
Install the
repeater so the
antenna is in a
location that is
NOT
surrounded
by metal and is
in free air as
high as possible
above the
ground.
Minumum 15 ft
above ground
recommended.
3.5”
5”
7.75”
3”
Antenna is
REQUIRED
.
(Included)
1/2” thick wall PVC conduit recommended
(not supplied).
Metal conduit may interfere with wireless signal.
Installation
0
F
E
D
C
B
A
9
8
7
6
5
4
3
2
1
0
F
E
D
C
B
A
9
8
7
6
5
4
3
2
1
RF ID
RF CHANNEL
1
6
2364-010
POWER
RF LOST
RF SYNC
RF STRENGTH
POWER
ER
1/2”
Conduit
+
-
5 VDC
Range testing is HIGHLY recommended
before FINAL installation.
Important Antenna Note:
Antenna range
WILL VARY
GREATLY
depending on individual setup (Antenna height
above the ground, background signal interference,
physical obstructions (trees, buildings etc.)).
Adverse weather (rain)
CAN
also affect antenna range.
