1200 Lb. Magnetic Gate Lock Kit
DoorKing Part Numbers
1216-080
1216-081
It is essential that the surfaces of the armature and the magnetic lock seat perfectly to one another when the gate is in the closed
position. This allows the lock to achieve its maximum holding strength. It is critical the armature is securely fastened to the gate
frame, but able to move with the 1/8 to 1/4 inch rubber spacer(s) to correctly align with the magnetic lock.
Important:
Weld the
brackets to fence post and
gate frame
BEFORE
assembling the armature
and maglock.
Note: Additional hardware is
supplied for a side mount option
and different armature spacing
configurations.
DoorKing Optional Hardware Note:
“L” and “Z” bracket kit
(P/N BO3-S12) is available for different installation configurations.
Sexnut Note: Using the sexnut,
the armature can be mounted
directly to the gate frame
without using the supplied
armature mounting bracket.
Secure sexnut through the gate
frame and into armature bolt.
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
Fron
t Mount T
ypical
Maglock
Fron
t Mount T
ypical
1” W
elded Bracket Ar
matu
re Bolt
1 1
/2” A
rmature Bolt
Wiring
Access
Plate
P/N B02-GL12
(Su
pplied)
P/N B01-GL12
(Supplied)
Plug unused
1/2” cond
uit
hole
s.
Magloc
k
Mounti
ng
Bracke
t
Weld to fen
ce post
.
(Typical c
onnec
tio
n)
Side
Mo
unt Option
Side
Mo
unt Option
Installation
Armature
Bolt
Options
Maglock
Typical Front Mount Welded
Moving Gate Frame
Armature
Gate Frame
Armature
Sexnut
Stationar
y Fence Post
Welded Mounting Brackets
Armature
Thinner
Option
Typ
ical
Thicker
Option
Insert
Roll Pin
Insert
Roll Pin
Sexnut Connection
Option
(No
t used for
welded
bracket option.)
Armature
Mounti
ng
Bracket
Weld to gate frame.
(Typical connection)
www.leedan.com [email protected] Toll-Free: 800-231-1414
