dji PHANTOM VISION User Manual Download Page 1

Page: 1 / 36

PHANTOM VISION

User Manual V1.00

Thank you for purchasing this DJI product. Please strictly follow these steps to use this product, including

PHANTOM VISION and DJI VISION App.

Please regularly check the web pageof PHANTOM VISIONat our website

www.dji-innovations.com

which is updated regularly. Product information, technical updates and manual corrections will be available on

this web page. Due to unforeseen changes or product upgrades, the information contained in this manual is

subject to change without notice.

This manual is only referenced for basic assembly and configuration; you can obtain more details and advanced

instructions when using the Assistant software or DJI VISION App. To assure you have the latest information,

please visit our website and download the latest manual and software.

If you have any problem that you cannot solve during usage, please contact your dealer.

PVT581

Summary of Contents for PHANTOM VISION




































Search results

Summary of Contents for PHANTOM VISION

Reviews:

Related manuals for PHANTOM VISION

Brands by name

Popular brands

dji PHANTOM VISION, User Manual

Search results

Summary of Contents for PHANTOM VISION

Reviews:

Related manuals for PHANTOM VISION

Brands by name

Popular brands