manualshive.com logo in svg

dji PHANTOM 4, User Manual

Share
Download
dji PHANTOM 4 User Manual Download Page 45

DJI GO App 

©

 2016 DJI. All Rights Reserved. 

 

45

Phantom 4

 

User Manual

 

[15]  Return to Home (RTH)

  : Initiate RTH home procedure. Tap to have the aircraft return to the last recorded home point.

[16]  Auto Takeoff/Landing 

 /   : Tap to initiate auto takeoff or landing.

[17] Livestream 

 : Livestream icon indicates the current video feed is broadcasting live on YouTube. Be sure the 

mobile data service is available on the mobile device. 

[18] Back

  : Tap to return to the main GUI.

Library 

Tap into library to use automatic video editor that built into the DJI GO app.. You can then select a tem-

plate and a specified number of clips, which are automatically combined to create a short film that can 

be shared immediately to the online video host.

Discovery

Sync pictures and videos to your mobile device, view flight logs, and check your DJI account status in 

"Discovery". Use your registered DJI account to login to "Discovery".

Me

View flight history, access to the DJI store, watch and learn vairous tutorials from this section. 

Summary of Contents for PHANTOM 4


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands