DJI Mavic 3 Classic
User Manual
59
©
2022 DJI All Rights Reserved.
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place. If the aircraft is performing Smart RTH
or auto landing, press once to exit the procedure and then brake.
Press and hold the RTH button until the remote controller beeps to start RTH. Press this button
again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for
more information about RTH.
Customizable Button
Go to System Settings in DJI Fly and select Control to customize the function of the button.
Functions include recentering the gimbal, switching the auxiliary LED, and enabling Cruise
Control.
Remote Controller Alert
The remote controller sounds an alert during RTH or when the battery level is low (6% to 15%).
The low battery alert level can be cancelled by pressing the power button. The critical battery
level alert (less than 5%), however, cannot be cancelled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the anten-
nas are positioned in relation to the aircraft as shown below.
Optimal Transmission Zone
Weak Signal
