DJI Mavic 3 Classic
User Manual
44
©
2022 DJI All Rights Reserved.
Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter
the camera view in DJI Fly. Press the screen until the camera adjustment bar appears. Drag the
bar up or down to control the tilt and left or right to control the pan.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the different operation modes in DJI
Fly.
Follow Mode: The angle between the gimbal’s orientation and aircraft front remains constant at
all times.
FPV Mode: The gimbal synchronizes with the movement of the aircraft to provide a first-person
flying experience.
• DO NOT tap or knock the gimbal when the aircraft is powered on. To protect the
gimbal during takeoff, take off from open and flat ground.
• Precision elements in the gimbal may be damaged in a collision or impact, which may
cause the gimbal to function abnormally.
• Avoid getting dust or sand on the gimbal, especially in the gimbal motors.
• A gimbal motor may enter protection mode in the following situations:
a. The aircraft is on uneven ground or the gimbal is obstructed.
b. The gimbal experiences excessive external force, such as during a collision.
• DO NOT apply external force to the gimbal after the gimbal is powered on. DO
NOT add any extra payload to the gimbal as this may cause the gimbal to function
abnormally or even lead to permanent motor damage.
• Make sure to remove the storage cover before powering on the aircraft. Also, make
sure to mount the storage cover when the aircraft is not in use.
• Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure.
The gimbal recovers full functionality once it is dry.
-90°
0°
35°
Gimbal and Camera
Gimbal Profile
The 3-axis gimbal of DJI Mavic 3 Classic provides stabilization for the camera, allowing you to
capture clear and stable images and video. The control tilt range is -90° to +35° and the control
pan range is -5° to +5°.
-5°
5°
