10
©
2015 DJI. All Rights Reserved.
System Image
System Image
The prerequisites for creating the system image are listed as follow:
1. A computer that runs on the Linux.
2. There is at least 16 GB free space for storage.
Downloading Package File
Downlaod the package file “manifold_image_v1.0.tar.gz” from the following link:
https://developer.dji.com/en/manifold/downloads/
Unzip the package files by running the commands listed below:
$ mkdir ~/manifold
$ cd ~/manifold
$ tar -xvzf <your path>/manifold_image_v1.0.tar.gz
Enteing Recovery mode
1. Switch off the Manifold development board and remove the AC adapter from the power port.
2. Connect the Recovery USB to an available USB port on the Host computer with the supplied
Micro USB cable.
3. Connect the power adapter to the Manifold development board.
4. Use a pin to press and hold the RECOVERY button, then press the POWER button once to
turn on the Manifold development board. Release the RECOVERY button to enter Recovery
Mode. Run “lsusb” from the Host computer to check if the Manifold has entered the Recovery
Mode successfully.
The Manifold has entered the Recovery Mode successfully If “NVIDIA” is displayed on the screen.
If no such text is displayed, repeat from step 1 to step 4.
The Manifold development board will not boot up when it is in Recovery Mode (nothing
appears on the monitor).
