manualshive.com logo in svg

dji LIGHTBRIDGE 2, User Manual, Page: 2 / 33

Share
Download
dji LIGHTBRIDGE 2 User Manual Download Page 2

2

 

©

 2015 DJI. All Rights Reserved. 

Using this Manual

Legends

 Warning

  Important

  Hints and Tips

  Reference

Before Flight

The following tutorials and manuals have been produced to ensure you make full use of your 
DJI LIGHTBRIDGE 2.

1.

 

DJI LIGHTBRIDGE 2 In the Box

2. 

DJI LIGHTBRIDGE 2 User Manual

Check to see that you have all of the components listed in the DJI LIGHTBRIDGE 2 In the Box 
manual. Complete the assembly with the help of this manual and the video tutorial on the DJI 
website.

Watch the Video Tutorials

Please watch the tutorial video below to learn how to install the 
DJI LIGHTBRIDGE 2 correctly:
http://www.dji.com/product/lightbridge-2/video

Download the DJI GO App

Download and install the DJI GO app before use. Scan the QR code or visit
“http://m.dji.net/djigo” to download the app.

DJI GO supports Android 4.1.2 (or later) or iOS 8.0 (or later).

  Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe 
Acrobat Reader to read this document, press Ctrl+F on Windows or F on Mac to 
begin a search.

  Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that 
section.

Summary of Contents for LIGHTBRIDGE 2


































Reviews:

No comments