Overview
DJI Lightbridge 2
User Manual
12
©
2015 DJI. All Rights Reserved.
[1]
[3]
[6]
[7]
[8]
[9]
[2]
[4]
[5]*
[1] Antennas
Transmits the aircraft’s control and video
signals.
[2] Mobile Device Holder Screw Hole
Used to mount the Mobile Device Holder.
Indicator Pattern
Sound
Air System Status
— Solid Red
chime
Ground System is set as Master but is not
connected to the Air System.
Blinks Blue
D-D-D......
Ground System is set as Master and is
attempting to connect to the Air System.
— Solid Green
None
Ground System is set as Master and is
connected to the Air System
— Solid Purple
D-D-
Ground System is set as Slave but is not
connected to the Air System.
— Solid Cyan
None
Ground System is set as Slave and is
connected to the Air System.
[3] Control Sticks
Controls the aircraft movement.
Customizable in the DJI GO app and
DJI Flight Controller Assistant.
[4] Return-to-Home (RTH) Button
Press and hold to initiate the RTH
procedure.
[5] Transformation Switch*
Customizable switch in the DJI Flight
Controller Assistant.
[6] Battery Level Indicator
Displays the current battery level.
[7] Status Indicator
Indicates the connection status
between the Air System and Ground
System.
Ground System
The Ground System uses the same interfaces as the remote controller for the DJI Inspire 1, which
is used as an illustration below. The interfaces marked with an asterisk (*) can be mapped to the
channels of the A2 Flight Controller. Refer to the A2 Flight Controller’s user manual for details.
The remote controller for the Inspire 1 is not compatible with Lightbridge 2. DO NOT
substitute any other remote controller for use with the Lightbridge 2 Ground System.