23
1.1. General Warnings
• This device must be connected to a grounded wiring.
• All electric supply circuits should be disconnected when working on the
device’s electrical system.
• The heating or water installations that the device will be connected
should be made by an authorized and competent engineering company.
Heat loss calculations and adequacy of the radiator or other heating
elements should be in accordance with the related global standards.
• Gas installation of the project must be controlled and approved by
authorized gas distribution company.
• Preparation of the required electrical system is under project
implementing company.
• Please make sure that installation is well cleaned before connecting the
device. If necessary, installation should be cleaned with neutral-based
cleaners.
• For anti-freezing purposes, protective chemical substances approved by
your authorized service may be added to installation.
• Please make sure that there is not any leakage in your installation
before proceeding to make connections to installation. Please check
particularly against radiator connection points.
• If hardness of the tap water is more than 20°F then please use a water
purifier or anti-limestone filter.
• Please make sure that filters are used on inlet and outlets of the
installation, on mains water connection points as well as valve and inlet
points.
English
