Dixon ZTR 2301, Operator'S Manual

Page: 31 / 42

TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and conditions
of grass, cut height setting, engine RPM and ground speed are some of the variables that interact
creating differences in cut quality. Examination of one or more of the above will generally
produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving
cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
Poor cut quality Engine RPM too low Increase engine RPM to maximum
Poor cut quality
Ground speed Reduce mowing speed
Poor cut quality
Grass buildup under Clean out underside of mower deck
Mower deck
Poor cut quality
Dull or bent blade Sharpen or replace as required
Poor cut quality
Incorrect engine to Use ONLY original equipment belt
Mower deck belt P/N 7725
Poor cut quality
Uneven tire pressures Check and adjust as required per
Operators manual
Poor cut quality
Improper blades Replace with original equipment
Blade designed for the Model ZTR
2301
Poor cut quality
Un-level mower deck Consult your dealer
CAUSES
SITUATION REMEDY
Page 28