OPERATION
28
8050-780
Turn to START position
8050-781
Release ignition to the RUN position
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
9. Press in and turn the ignition key to the start
position.
10. When the engine starts, immediately release the
ignition key back to the run position. Push the
choke control in gradually when the engine has
started.
11. Set the engine speed with the throttle. Allow the
engine to run at a moderate speed, approximately
mid throttle, for 3-5 minutes before loading it too
heavily.
USE
FULL THROTTLE WHEN MOWING
(no choke).
8050-178
Set the engine speed
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects
or other reproductive system damage.
The engine exhaust contains carbon
monoxide, which is a odorless, colorless,
poisonous gas. Do not use the machine
in enclosed spaces.
Summary of Contents for 966690603
Page 51: ...51 SCHEMATIC 8053 002...
Page 60: ......
