background image

SAFETY

12

8011-517

Never allow children to operate the machine

8011-518

Keep children away from work area

Children

•  Do not use on steep slopes.
•  Do not try to stabilize the machine by putting a 

foot on the ground.

•  Do not mow near drop-offs, ditches, or 

embankments. The machine could suddenly roll 
over if a wheel is over the edge or if the edge 
caves in.

WARNING!

CHILDREN CAN BE INJURED BY THIS 
EQUIPMENT.  The American Academy 
of Pediatrics recommends that children 
be a minimum of 16 years of age before 
operating a riding lawn mower. 

Keep children out of the mowing area 
and in the watchful care of a responsible 
adult other than the operator.

Tragic accidents can occur if the operator is not 
alert to the presence of children. Children are often 
attracted to the machine and the mowing activity. 

Never

 assume that children will remain out of the path 

of danger.

•  Keep children out of the mowing area and in the 

watchful care of a responsible adult other than the 
operator.

•  Be alert and turn machine off if a child enters the 

area.

•  Before and while backing, look behind and down 

for small children.

•  Never carry children, even with the blades shut 

off. They may fall off and be seriously injured or 
interfere with safe machine operation. Children 
who have been given rides in the past may 
suddenly appear in the mowing area for another 
ride and be run over or backed over by the 
machine.

•  Never allow children to operate the machine.
•  Use extra care when approaching blind corners, 

shrubs, trees, or other objects that may block the 
view of a child.

8011-519

Be extra cautious when driving on slopes

Summary of Contents for 966690603





























































Reviews: