dIXEL
Manual de operare Xweb5000
Pag. 13 / 115
WARNING
: this procedure, if the user makes a mistake, overwrites the existing model of the selected devices
with a new model that is NOT compatible.
2.1.7 LOCAL CONNECTIVITY
2.1.7.1
LOCAL CONNECTION WITH MONITOR, MOUSE AND KEYBOARD
On the back side, the XWEB is provided with the sockets for a monitor, a mouse and a keyboard. Please
connect all the peripherals before powering-on the unit otherwise the system may fails to recognise them. This
means that , for example, if you do not plug the monitor cable now, you won‟t see anything displayed on it.
The unit can also work without these three elements therefore if the user intend to work just with the remote,
he can definitively remove them after the setup operations.
In any case inside XWEB is loaded a standard browser to allow the user setting up the unit.
If necessary check the instructions manual of each device connected to the unit.
The operative procedure to work with XWEB is the same for all connection method.
2.1.7.2
LOCAL CONNECTION THROUGH PERSONAL COMPUTER
It is possible to use the local connection with a single PC, provided with LAN card, by using the net connector
RJ 45 (LAN). Due to the PC-client power, this kind of connection is more suitable for the setup procedures.
Remember that the PC must be provided with internal or external LAN card adapter.
IMPORTANT:
the cable
between the Server and the PC must be with crossing wires (“Bridge Cable”).The
connection procedure from the remote PC is made simply by launching the Browser program and inserting the
default address of the XWEB unit
http://192.168.0.200.
Proper information about setting up a network
connection for the client PC, can be found inside the INSTALLATION MANUAL on §4.1.
Summary of Contents for xweb 5000
Page 1: ...OPERATION MANUAL...
Page 2: ......
