Function
Condition
Special Function
Day & Night
BLC
Blemish Compensation
Sens-up
OSD Language
Motion Detection
DNR
Digital Zoom
Privacy
Mirror(H-REV)
Flip(V-REV)
Freeze
Sharpness
Color/BW/Auto/EXT
BLC/HSBLC/OFF & DWDR selectable
256 Point(Even 128 point, Odd 128 point)
Auto/Off(Selectable limit x2 ~ x256)
English/Korean/Chinese/Japanese
On/Off (4 Zone)
Off/On (0~100 Level Adjustable)
On(x32)/Off
On/Off(8 Zone)
On/Off(Horizontal)
On/Off(Vertical)
On/Off
Level Adjustable
IR Dome Camera
1/3" Sony SUPER HAD II CCD
510(H) x 492(V)
9.6µm(H) x 7.5µm(V)
HORI. Color 400 TV Line
NTSC
Internal
2:1 Interlace
15.734 KHz
59.94 Hz
1.0 Vp-p (Sync. Negative) Termination 75Ω
γ
= 0.45 typ.
IR ON: 25m Range at 0Lux / IR OFF: 0.01Lux (F1.2)
45dB or More (AGC OFF)
Automatic
1/60 ~ 1/100,000 sec
AVERAGE TEST ILLUMINANCE BY FRONT VIEW
120mA Max. (IR ON : 350 mA Max.)
Regulated DC 12V
±
15%
Yes
3.6mm
-10 ~ 50 °C (14 ~ 122 °F)
-20 ~ 60 °C (-4 ~ 140 °F)
123.1mm(W) X 123.5mm(D) X 84.8mm(H)
Approx. 350g
Model
CH 03515
Specification
Type
Image Sensor
Effective Pixel
Cell Size
Resolution
TV Type
Sync. Type
Scanning System
Scanning Frequency H.
Scanning Frequency V.
Video Out
Gamma Characteristic
Min. Illumination
S/N Ratio
Gain Control
Shutter
Test Illumination Area
Current Consumption
Supplied Voltage
Reverse Polarity Protection
Lens
Operation Temp
Preservation Temp
Dimension
Weight
Troubleshooting
If you have a trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
The image does not
appear on the screen.
Check the power source for the monitor and camera
and assure that the voltage and polarity are properly
connected and being supplied correctly.
The image on the
screen is dark.
Check if the lens is stained. If dirty, clean the lens
with a soft, clean cloth.
Adjust the contrast feature of the monitor and DC level.
The surface of the
camera case is hot and
a black line appears on
the screen.
Check if you have connected the camera to a proper
power source and if there is no problem with the power,
turn the unit off immediately and seek assistance from
our After Service department.
Check if the camera is pointed toward the sun or a
fluorescent lamp.
Adjust the angle or location of the camera if too much
light is coming into the screen.
The screen blinks a lot.
Special Menu
Menu
Camera Title
Off
Off / On
OSD Menu Structure 2
Default Set
Motion
On : Area Select (1 ~ 4)
Area Display (On / Off)
Left / Right (0 ~ 100)
Width (0 ~ 100)
Top / Bottom (0 ~ 100)
Height (0 ~ 100)
Sensitivity (0 ~ 40)
Motion View (Off/On)
Off
Sync
INT / LL
INT
Privacy
On : Area Select (1 ~ 8)
Area Display (On / Off)
Left / Right (0 ~ 100)
Width (0 ~ 100)
Top / Bottom (0 ~ 100)
Height (0 ~ 100)
Color (0 ~ 15)
Off
RS485
1 ~ 255 Selectable
Off / On
2400 / 4800 / 9600 / 19200 / 38400 / 57600
Cam ID
ID Display
Baudrate
Return
Return to the SETUP menu
-
Setup Menu
Menu
Lens
DC
DC / Manual
Exposure
Shutter : -
Brightness : -
AGC : Middle
Sens_up : Auto
BLC : Off
DWDR : Off
Shutter : FLK, 1/50~1/100000, MANUAL(x256)
Brightness : 0~100 Level
Off / Low / Middle / High
Off / Auto (2 ~ 256 Level)
Off / BLC / HSBLC
Off / Indoor / Outdoor
Return
OSD Menu Structure 1
Default Set
White Bal
ATW / AWB / AWC / Manual / Indoor / Outdoor
Manual
(R Gain : Level adjust / B Gain: Level adjust)
ATW
Special
(Structure 2)
Refer to the
next Table
3DNR
On(Limit : 0 ~ 100 Level Selectable) / Off
On
Reset
Set a manufacture state
-
Exit
Saves all the SETUP Menu and then exits
-
Day/Night
Auto
Auto : Delay / S-Level / E-Level
EXT : -
B/W : Burst Off/On
Color : -
Adjust
Sharpness :
Blue :
Red :
0~31 Level Selectable
0~100 Level Selectable
0~100 Level Selectable
D-Effect
On / Off
Off / Mirror / V-Flip / Rotate
On (D-Zoom x 32 / PAN
±
100 / TILT
±
100) / Off
0.05 ~ 1.0 Selectable
Off / On
Return
Freeze : Off
Mirror : Off
D-Zoom : Off
Gamma : 0.45
Neg. Image: Off
Language
English/Japanese/Chinese/Korean
English