Special Menu
Menu
Default Set
OSD Menu Structure 2
Privacy
Area Select : Area1 ~ Area12
Mode : On/Off
Mask Color : Green/Red/Blue/Black/White/Gray
Mask Tone : Level Adjustable
Top/Bottom/left/Right : Position Adjustable
Off
Language
English/Japanese/Spanish/Korean/
French/Portuguese/Taiwanese
English
Return
Return to the SETUP menu
-
COMM ADJ
Cam ID : ID Selectable
Baudrate : 2400/4800/9600/19200/38400/57600
Parity : 8-N-1/8-E-1/8-O-1
Ret Pkt : Enable/Disable
Disp Cam ID : Off
Protocol : STW(SPD)/PELCO-D/PELCO-P/SEC/
BOSCH/HONEYWELL/VICON/PANASONIC
Cam ID : 1
Baudrate : 9600
Parity : 8-N-1
Ret Pkt : Enable
Disp Cam ID : Off
Protocol : STW(SPD)
Return
Sensitivity : Area1 ~ Area8
Area Mode : On/Off
Sel Pos : L_TOP / R_TOP / L_BOTTOM / R_BOTTOM
XPOS / YPOS : Position adjustable
FILL SET
Return
Motion Det
Off
Sync
INT (Phase : 0 ~ 359 Level Selectable)
INT
Camera ID
Off
On / Off
Image Adj
V-Rev : Off
H-Rev : Off
D-Zoom : Off
Dis : Off
Font Color : Blue
Sharpness : On
V-Rev : On / Off
H-Rev : On / Off
D-Zoom : On / Off (X1 ~ X16)
Dis : On / Off
Font Color : White, Yellow, Green, Red, Blue
Sharpness : On / Off (Level : 1~20 Level adjustable)
Return
Monitor
LCD
LCD / CRT / USER
Gamma (Level : 0.2 ~ 1.0 Gamma Selectable)
PED Level (Level : 0 ~ 70 Level Adjustable)
Color Gain (Level : 0 ~ 70 Level Adjustable)
Reset
u
n
e
M
u
n
e
M
p
u
t
e
S
Lens
DC
DC / Manual
Exposure
Brightness : 25
Shutter : Manual
AGC : High
Sens_up : -
Brightness: 1 ~ 70 Level Selectable
Esc : Min/Max (Level Adjustable)
Manual : X512 ~ 1/120K
A.FLK
---
AGC : Off / Low / High
Sens-up : Off / Auto (X2~X512 Level Adjustable)
Return
OSD Menu Structure 1
Default Set
White Bal
ATW / Indoor / Outdoor / AWC / Manual
(R Gain / B Gain: Level adjustable)
ATW
Day/Night
Auto/External(NOT SUPPORT)/Color/B/W
-Color B/W : Duration(Fast/Slow), Dwell Time
-B/W COLOR : Duration(Fast/Slow), Dwell Time
-Return
Auto
DNR3
On / Off (Level : 1 ~ 32 Level Selectable)
On
SSDR
On/Off (Limit : 1~15 Level Adjustable)
Off
Special
Refer to below
-
Exit
Save, Not Save, Reset
Save
Backlight
Off
Off
BLC : Level (Low/Middle/High)
/Top/Down/Left/Right
HLC : Level (Low/Middle/High)/Limit/Mask
Color/Mask Tone/Top/Down/Left/Right
Function
Condition
Special Function
Day & Night
BLC
SSDR
DIS
Blemish Compensation
Sens-up
OSD Language
Motion Detection
DNR
Digital Zoom
Privacy
Mirror(H-REV)
Flip(V-REV)
Freeze
Sharpness
Color/BW/Auto/EXT(Built in Dc Motor Driver)
BLC/HLC/Off
On/Off
On/Off
256 Point(Even 128 point, Odd 128 point)
On/Off(x2 ~ x512)
English/Korean/Spanish/Japanese/
French/Portuguese/Taiwanese
On/Off (8 Zone)
On/Off (2D+3D)
On/Off (x1~x16)
On/Off(12 Zone)
On/Off(Horizontal)
On/Off(Vertical)
On/Off(Stop)
On/Off(Level Adjustable)
Day & Night Vandal Dome Camera
1/3" Sony SUPER HAD II CCD
768(H) x 494(V)
6.35µm(H) x 7.4µm(V)
HORI. Color 600 TV Line, B/W : 700 TV Line
NTSC
Internal
2:1 Interlace
15.734 KHz
59.94
1.0 Vp-p (Sync. Negative) Termination 75
= 0.45 typ.
0.1 Lux at Color(F1.2)
52dB or More (AGC OFF, Weight ON)
ATW / OUTDOOR / INDOOR / MANUAL / AWC
(1,700°K~11,000°K)
Off / Low / High
1/60 ~ 1/120,000 sec
AVERAGE TEST ILLUMINANCE BY FRONT VIEW
200mA Max.
Regulated DC 12V
±
15%
Yes
2.8~11mm
-10 ~ 50 °C / 30% to 80% RH
-20 ~ 60 °C / 20% to 90% RH
153mm(W) X 105.2mm(H)
Approx. 1.2kg
Model
CH 03204
Specification
Type
Image Sensor
Effective Pixel
Cell Size
Resolution
TV Type
Sync. Type
Scanning System
Scanning Frequency H.
Scanning Frequency V.
Video Out
Gamma Characteristic
Min. Illumination
S/N Ratio
AWB
Gain Control
Shutter
Test Illumination Area
Current Consumption
Supplied Voltage
Reverse Polarity Protection
Lens
Operation Temp / Humidity
Preservation Temp / Humidity
Dimension
Weight
Troubleshooting
If you have a trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
The image does not
appear on the screen.
Check the power source for the monitor and camera
and assure that the voltage and polarity are properly
connected and being supplied correctly.
The image on the
screen is dim.
Check if the lens is stained. If dirty, clean the lens
with a soft, clean cloth.
Adjust the Back Focus of the lens again.
The surface of the
camera case is hot and
a black line appears on
the screen.
Check if you have connected the camera to a proper
power source and if there is no problem with the power,
turn the unit off immediately and seek assistance from
our After Service department.
Check if the camera is pointed toward the sun or a
fluorescent lamp.
Adjust the angle or location of the camera if too much
light is coming into the screen.
The screen blinks a lot.
=>
=>
(RS485 IS NOT
SUPPORTED)
Hz