Divis 26X, Instruction Manual, Page: 7 / 39

v
DiViS 7
w w w .
DiViS
D V R . c o m
FIG. 4
FIG. 3
FIG. 2
UNLOCK
5.
INSTALLATION
5-1. CAMERA SETUP
1) To separate camera body
Loosen Lock Screw 0.07in (2mm) using wrench. (Don't pull out the screw) (FIG. 2)
Separate the upper body from the lower body by rotating counterclockwise. (FIG. 3, 4)
2) After separating, set DIP switches. (Refer to the page 32, 33, and 34)
3)
To assemble camera body
Rotate the upper body clockwise to assemble both bodies (FIG. 5, 6)
Screw up the Lock Screw using wrench. (FIG. 7)
● Don't screw too tight.
LOCK
FIG. 5
FIG. 6 FIG. 7
Screw up to lock the camera body
0.08in (2mm)