Divis 26X, Instruction Manual, Page: 31 / 39

v
DiViS 31
w w w .
DiViS
D V R . c o m
8. OSD MENU SETTING
8-10. SECTOR SET
Up to 8 programmable sectors are available.
This feature can be used to notify information about specific areas. It will display user-defined
sector id whenever the camera points to one of the specified areas.
1) SECTOR SET - SECTOR NO.
Up to 8 programmable sectors are available.
2) SECTOR SET - SECTOR ID
To set a SECTOR ID, pan left/right.
Press ZOOM TELE button to move to the cursor to the right or ZOOM WIDE button to move
the cursor to the left. (Space will be displayed as )
3) SECTOR SET - SECTOR START
To set a SECTOR START position, press FOCUS FAR button and set the camera position to a
desired place. Press FOCUS FAR button again to escape.
4) SECTOR SET - SECTOR END
To set a SECTOR END position, press FOCUS FAR button and set the camera position to a desired
place. To press FOCUS FAR button again to escape.
5) SECTOR SET - SAVE
After setting the SECTOR positions, move the cursor over SAVE and pan left/right to save the data.
(it will switch to the next sector number automatically.)
6) SECTOR SET - EXIT
To exit from this page, move the cursor over EXIT and pan left/right.
8-11. EXIT
To escape OSD Main Menu, move the cursor over EXIT and pan left/right.
SECTOR SET
SECTOR NO
: 01
SECTOR ID : SECTOR01
□□□□□□□□
SECTOR START : XXX.X.XX.X
SECTOR END : XXX.X.XX.X
SAVE
EXIT
DEFAULT SETTING