manualshive.com logo in svg

Divis 26X, Instruction Manual, Page: 27 / 39

Share
Download
Divis 26X Instruction Manual Download Page 27

 
 
 

v                                                                                                                                                                                             

DiViS

 

27

w w w .

DiViS

D V R . c o m

 

 

 

 

8. OSD MENU SETTING 

 

 

 

8-6. TOUR  SET 

Up to 8 programmable Tours can be set, each consisting of up to 64 preset steps. 
 After setting up the tour, press 71~78 + PRESET buttons to launch group tour #1~8. 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

  1)  TOUR SET - TOUR NO. 

 

Up to 8 group tours can be programmed. 

 

  2)  TOUR SET - TOUR TITLE 

 

To set tour title, pan left/right.    Each title can have up to 16 characters.   
Press ZOOM TELE button to move the cursor to the right or ZOOM WIDE button to move the cursor 
to the left (Space will be displayed as 

…

)   

   

The tour title will not be displayed on the monitor and is only for the reference of user. 

 

  3)  TOUR SET - TOUR STEP 

 

Each tour group can consist of up to 60 preset steps with different dwell time and speed.     

 

  4)  TOUR SET - PRESET NO. 

 

For each tour step, it is possible to select any preset number between 1~64 and 100~200. 

    The default setting is BLK 

 

  5)  TOUR SET - DWELL TIME 

 

Dwell time can be configured (1~99 seconds). The default setting is 03 seconds. 

 

  6)  TOUR SET - SPEED 

 

Each tour step can be configured with a different speed (10°/S ~ 300º/S). 

      The default setting is 300º/S.

   

 
  7)  TOUR SET - SAVE 

 

To save the data and exit from this page, move the cursor over SAVE and pan left/right. 

 

  8)  TOUR SET - EXIT 

 

To escape this page, pan left/right.   

 

DEFAULT SETTING

 

TOUR SET 

 
TOUR NO 

: 01 

TOUR TITLE  : TOUR01

□□□□□□□□□□

 

TOUR STEP 

: 01 

PRESET NO.  : 01 
DWELL TIME  : 03 
SPEED : 300

º

/S 

SAVE AND EXIT 
EXIT 

Summary of Contents for 26X








































Reviews:

No comments