manualshive.com logo in svg

Divis 26X, Instruction Manual, Page: 24 / 39

Share
Download
Divis 26X Instruction Manual Download Page 24

 
 
 

v                                                                                                                                                                                             

DiViS

 

24

w w w .

DiViS

D V R . c o m

 

 

 

 

8. OSD MENU SETTING 

 

 

 

  6)  CAMERA SET - PIC FLIP 

 

  The picture flip feature swaps the top and bottom of the image, literally inverting it.     

    The default setting is OFF. 

 

  7)  CAMERA SET - BLC (Back Light Compensation) 

 

BLC mode can be toggled. 

 

*  OFF    Backlight compensation is disabled. 

 

*  ON   Backlight compensation is enabled. 

 

This function can be toggled by pressing 93 + PRESET buttons. 

 

The default setting is OFF.   

 

  8)  CAMERA SET - D/N MODE 

 

The dome camera can operate in day / night mode and will switch depending on lighting conditions.   

 

Alternatively, it can be forced into color only mode.     

        This function can be toggled by pressing 94 + PRESET buttons. 
 

The default setting is AUTO MODE.   

 

  9)  CAMERA SET - DSS MODE (DIGITAL SLOW SHUTTER) 

 

If digital slow shutter is enabled, the exposure time of the camera is increased, this allows more light   

    to be collected, improving low light response.  
        This setting should not be enabled if the dome needs to be on tour mode at night or fast moving   
        objects are likely to be in the scene to prevent smearing. 
    The default setting is OFF.  

 

10)  CAMERA SET - EXIT 

 

To exit from this page, pan left/right.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 26X








































Reviews:

No comments