manualshive.com logo in svg

Divis 26X, Instruction Manual, Page: 14 / 39

Share
Download
Divis 26X Instruction Manual Download Page 14

 
 
 

v                                                                                                                                                                                             

DiViS

 

14

w w w .

DiViS

D V R . c o m

 

 

 

 

6. QUICK OPERATING KEYS 

   

The dome supports Pelco-D/P and Maxpro protocols. For DiViS DVR products, please select DiViS-D 
protocol for full compatibility.  The dome may be used with any controllers or DVRs that support the 
Pelco D and Pelco P protocols. The default setting of the dome is Pelco D / P (auto detection) with 2400 
bps (baud rate). 
 

[PELCO D/P PROTOCOLS] 

The comprehensive set of features of the dome camera can be accessed with Pelco compatible 
controllers via quick operation keys as defined below. 

 
1~64 + preset and 100~200 + preset are used for normal user presets.   
65-99 + preset buttons are reserved for special functions.   
For example, to enter OSD MENU, press 95 + PRESET buttons 
 

<Quick Operation Key Table 1> 
Number 

Note 

Function 

1~64,100~200 +Preset 

Preset 

Execute Preset 1 ~ 64, 100~200 

65 +Preset 

Preset Status 

Display Preset Status 

66 +Preset 

Auto Scan 

Execute Auto Scan 

67 +Preset 

Auto Flip 

Toggle Auto Flip Mode(On/Off) 

70 + Preset 

VIB CORR 

Toggle Picture Stabilization function (On/Off) 

71~78 + Preset 

Group Tour 

Execute Group Tour #1 ~ #8 

81~88 + Preset 

Pattern 

Execute Pattern #1 ~ #8 

91 + Preset 

Zero Position 

Search Pan / Tilt Zero Position 

92 + Preset 

Freeze 

Freeze image when camera is operating 

93 + Preset 

BLC 

Toggle BLC function(On/Off)   

94 + Preset 

Day / Night 

Toggle Day & Night Mode (Day / Night / Auto Mode) 

95 + Preset 

OSD 

Display OSD Main Menu 

96 + Preset 

Focus Adjust 

Adjust Focus 

97 +Preset 

Alarm 

Toggle Alarm (Enable/Disable) 

98 +Preset 

AUX 1 

Toggle Aux1 (On/Off) 

99 +Preset 

AUX 2 

Toggle Aux2 (On/Off) 

 

<Quick Operation Keys Table 2>

 : Use these function keys if these keys are available on the controller.

 

Menu 

Function 

Tilt Up / Down 

  Move sub menu cursor up / down   

Pan Left / Right 

  Enter the sub menu or change value 

Focus Near 

  Used as an Enter key. 

Focus Far 

  Used as a function changing key (usually to set coordinate) 

Zoom Tele 

  Move the status cursor to the right 

Zoom Wide 

  Move the status cursor to the left 

 

●

  65 + PRESET : "Preset Status" is displayed, to exit from this screen, press Focus Near button. 

●

  70 + PRESET : Enable / Disable picture stabilization image feature.

 

  This feature can be only operated by preset number, and it is not included in OSD main menu.    

Summary of Contents for 26X








































Reviews:

No comments