Divis 26X, Instruction Manual, Page: 10 / 39

v
DiViS 10
w w w .
DiViS
D V R . c o m
5. INSTALLATION
5-4. CEILING MOUNT TYPE
1)
When installing the camera, make sure to install it on a ceiling that is strong enough to
support its weight, approx. 4.41lb (2kg).
2) Make a hole, Ø 5.71in (Ø145mm), on the ceiling. (FIG. 9)
Hook the safety wire to suspension and to the safety wire hold on the bracket. (FIG. 10)
3) Install the ceiling mount bracket using 4 screws – Ø 0.16in (Ø4mm) tapping screws. (FIG. 11)
4) Fix wires using cable ties. (FIG. 12)
5) Make the wires go though the square hole.
Insert mount holder and twist the camera counterclockwise. (FIG. 13)
6) Fix the camera by screwing through Lock Holder1 and Holder2. (FIG. 14)
7) Install the cover by inserting cover lock and twisting clockwise. (FIG. 15)
1 CEILING MOUNT BRACKET
CONTENTS
SUSPENSION
SAFETY WIRE
COVER HOLE
LOCK HOLDER 1
SCREW (Ø4.0)
CEILING BRACKET
SAFETY WIRE HOLE MOUNTING HOLE
LOCK HOLDER 1
CABLE TIE
LOCK HOLDER 2.
MOUNT HOLDER
FIG. 10
FIG. 9 FIG. 11 FIG. 12
SCREW (M3.0)
COVER
COVER HOLE
COVER LOCK
FIG. 13
FIG. 14 FIG. 15
Ø5.71in(Ø145mm)