2
Chapter 1: Product Introduction
Hardware Installation
No.
Name
1
Mounting Screws
2
Wall Mount Bracket (ACB-02) W1 Kit
3
Expansion Bolts
4
Mounting Screws
5
Wall or Ceiling Surface
6
Installation Sticker
Description:
The mounting surface for the bracket installation needs to
withstand at least three times the total weight of the bracket and IP camera.
1. Use the 4 flat head screws to fix the metal adapter plate to the wall
mount bracket.
2. Put the installation sticker on the surface (wall or ceiling) of where it will
be installed.
3. Take out the screws on the bracket and put them into the expansion bolts
to fix the bracket on the surface (wall or ceiling).
4. Remove the base of the camera. Use screws to fix the base onto the
bracket.
5. Fix the camera back to the base secured on the bracket.
