diversey TASKI vacumat 44T, Instructions Of Use

Page: 52 / 236

51
End of operation
Cleaning the machine
Caution:
Never clean the machine with a high-pressure
cleaner or water jet.
Water ingress in the machine may cause considerable
damage to the mechanical or electrical parts.
Storing / parking the machine (not in opera
-
tion)
Notice:
Never store the machine when it is still wet from
cleaning. Always allow it to dry out before re-as
-
sembling.
This will prevent the formation of mold and unpleasant
odors.
Service, maintenance and care
The maintenance of the machine is a prerequisite for impeccable op
-
eration and a long service life.
Warning:
This machine may only be lifted using lifting gear
(e.g. hoist, loading ramp, etc.).
The heavy weight of the machine, can cause injuries by
lifting.
Caution:
Use original TASKI parts only; otherwise any war
-
ranty and liability claims will be invalidated.
Service intervals
TASKI machines are high-quality machines that have been inspected
for safety at the factory by authorized inspectors. Electrical and me
-
chanical parts are subject to wear and aging after a longer period of
use.
Notice:
In case of extraordinary use and/or insufficient
maintenance, shorter intervals may be required.
Service center
Please always indicate the type and number of the machine whenev
-
er you contact us to place an order or in case of malfunctions.
You can find this information on the nameplate of your machine. The
address of your closest TASKI service partner is provided on the last
page of these instructions of use.
• Switch the machine off (ON/OFF switch) and pull the power
supply cord out of the mains socket.
• Wipe the machine with a moist cloth.
• Wind up the main cord loosely.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity ◊
◊◊
◊◊
◊
⊗
Pa
ge
Cleaning the tool ●
Cleaning / replacing the coarse filter ●
Cleaning / replacing the filter cloth ●
Cleaning the overfill protection (indica
-
tion for full recovery tank) (Ensure that
the float is not stuck and can easily
move up and down)
●
Clean the machine with a moist cloth ●
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 500 working hours
or at least once a year.