CHAPTER 3
INSTALLATION
3-5
Displays of series DT-203NN, DT-105NN and DT-110NN
To finish we only have to close the cable glad as strong as possible
to avoid that the dust or water can enter.
3.7.2
DB-9 connector with cover (TDL)
The DB-9 mounting is really easy and quick to make, for it, we will pass the cable through the
cable glad and leave enough space for its welding (see section 3.3 and/or 3.5) depending if it is
for the transfer of messages to the memory or for the temperature and humidity probe.
Once finished, we must put the connector inside the cover, placing correctly the connector holes
with the inner screws, then push hard until we notice the “click”.
Click
