DITECH DT5649, Instruction Manual

Page: 33 / 44

33
DEU
ENG
DEU
Commissioning
ENG
6.2 Teach-in of the device
Prior to operating the UP-Switch Actuator and meter for brand switch-
es, it must be integrated into the DITECH Smart Home iL system via the
DITECH Smart Home iL central unit (DT5637). For this, teach-in the re-
spective device as follows.
Ö The DITECH Smart Home iL central unit has been set up via the DITECH
Smart Home iL app.
Ö
The actuator is assembled and installed.
1. Open the DITECH Smart Home iL app on your smart phone.
2. Select the menu item Teach-in device.
The teach-in mode is active for three minutes after installation.
The teach-in mode can be activated manually by removing the
rocker and short pressing of the system key.nually by removing
the rocker and short pressing of the system key.
3. The device will be displayed automatically in the app.
4. For confirmation of the teach-in process, enter the last four digits of
the device number (SGTIN) in the app or scan the supplied QR code.
The device number can be found on the back side of the device.
The LED will light up in green after a successful teach-in process.
The process must be repeated if the LED lights up in red.
5. Follow the directions of the DITECH Smart Home iL app.