ENG
DEU
34
DEU
Commissioning
ENG
3. Release the room control unit Analog from the installation bottom (see fig. 5
page 5).
4. Pull out the insulating strip from the battery compartment, or insert batteries (see
fig. 6 page 5). If batteries have already been inserted, press the system key
(C) for at least 4 seconds in order to activate the teach-in mode.
5. The device is displayed automatically in the DITECH Smart Home iL app.
6. Enter the last four ciphers of the device number (SGTIN) or scan the supplied QR
code for confirmation. The device number can be found below the QR code or
in the battery compartment.
The LED will light up in green after a successful teach-in process. If the
LED lights up red, repeat the process.
7. Follow the instructions in the app.
5.2 Installation
The place of installation can be selected flexibly due to the battery operation. Installation
can be performed with screws, with the supplied adhesive strips, or in a flush-type box.
5.2.1 On-surface installation
9
Select an appropriate installation position.
1. Ensure that the installation position is free from hidden lines.
Summary of Contents for DT5640
