Ditch Witch XT855, Operator'S Manual

Page: 58 / 107

XT855 Operator’s Manual
Transport - 57
Haul
CMW
Unload
With Tiedown Kit
1. Lower ramps.
2. Remove tiedown.
3. Start engine.
4. Fasten seat belt and swivel seat to face the tool carrier.
5. Ensure work mode switch is in tool carrier mode.
6. Tilt mount plate out of rest and lift until it clears rest.
7. Slow engine speed and back unit down ramps.
Without Tiedown Kit
1. Lower ramps.
2. Remove tiedowns.
3. Start engine.
4. Fasten seat belt and swivel seat to face the tool carrier.
5. Ensure work mode switch is in tool carrier mode.
6. Raise mount plate.
7. Slow engine speed and slowly back unit down ramps.
Unhitch Trailer
1. Stop tow vehicle and trailer on level ground.
2. Put manual transmission into first or reverse gear or automatic transmission into park. Turn off ignition.
Set parking brake.
3. Block trailer wheels.
4. Reverse “Hitch Trailer“ steps to unhitch trailer from tow vehicle.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
NOTICE:
• Load and unload trailer on level ground.
• Ensure trailer wheels are blocked.
• Attach trailer to vehicle before loading or unloading.