Ditch Witch SK650, Operator'S Manual

Page: 43 / 83

Transport - 42
SK650 Operator’s Manual
Lift
CMW
Lift
Points
Lifting points are identified by lifting decals. Lifting at other points is unsafe
and can damage machinery.
Procedure
Use a hoist capable of supporting the equipment's size
and weight. See “Specifications” on page 73 or
measure and weigh equipment before lifting.
To lift unit with attachment, use four lift points as shown.
To lift unit without attachment, use one of the methods
below:
• Use two points nearest operator station.
• Use four lift points as shown.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
IMPORTANT: Front of unit will be lower than
rear of unit when using only two lift points.