Ditch Witch RT80Q, Operator'S Manual

Page: 145 / 207

Service - 144
RT80Q Operator’s Manual
Recommended Lubricants/Service Key
Approved Coolant
Beginning June 10, 2016 , this unit was filled with red coolant meeting Deutz specification DQC CB-14
before shipment from factory. Add or replace only with coolant meeting this specification, such as Shell
Rotella
®
ELC NF coolant. This coolant is available, pre-diluted, from your Ditch Witch dealer as part
number 255-1053. Contact your Deutz service partner for a full list of approved coolants meeting DQC CB-
14. In an emergency, non-Deutz approved, heavy duty diesel engine coolant meeting ASTM D6210 may
be used. Change to DQC CB-14 coolant as soon as practical.
Prior to June 10, 2016 , this unit was filled with yellow John Deere
®
Cool-Gard
®
II coolant before
shipment from factory. Add only John Deere Cool-Gard II (p/n 255-006) or any fully-formulated, ethylene
glycol based, low-silicate, heavy-duty diesel engine coolant meeting ASTM D6210. Switch to the new
approved blue coolant described above at the next change interval.
Engine Oil Temperature Chart
NOTICE:
• Do not use water or high-silicate automotive-type coolant. This will lead to engine damage or
premature engine failure.
• Use only distilled water for mixing coolants. Do not use tap water.
t37om047w.eps
SAE 0W-30
SAE 0W-40
SAE 5W-30
SAE 5W-40
SAE 10W-30
SAE 10W-40
SAE 15W-40
SAE 20W-50
Temperature range anticipated before next oil change