To connect your devices see instructions on the reverse side of this guide.
For Position
Only
Before you begin:
>
Read through instructions
You can fi nd additional self-help resources at distributel.ca/support.
If you have a traditional home phone (e.g. Bell) you will need to use a line fi lter
and splitter. You will fi nd instructions for how to do this at distributel.ca/support
>
Review contents of your install kit:
●
A phone cable to connect to the network
●
An ethernet cable to connect your device
●
DSL 516 modem and power cord
Connect one end of the phone cable to the ’DSL’ port
on your modem, then connect the other end of the
cable to a nearby telephone wall outlet.
Attach the power cord to the ‘Power’ port on your
modem, then plug the cord into a nearby electrical
wall outlet.
Turn the modem on,
and wait until these
lights are on: ‘Power’,
‘DSL’, ‘Internet’, ‘WPS’,
‘USB’ as well as ‘2.4 GHz’
and ‘5 GHz’.
This can take about
5 minutes.
1
2
3
Part 1: Connecting the modem
www.distributel.ca
Setting up your High Speed Internet Service
Smart RG 516
Internet Modem Set Up Guide
Distributel_Modem 516_How to Guide_Accordian fold.indd 2-4
Distributel_Modem 516_How to Guide_Accordian fold.indd 2-4
2020-07-30 11:59 AM
2020-07-30 11:59 AM
