1. Identify Vertical Panels (E and F), and Shelves (G and H) as marked in the image below. Insert 3 cam posts (H2) into
holes on the Vertical Panel E. Tighten only until snug. Do the same for all Panel F and Shelf G.
Attach 1 Shelf G to Panel E by inserting cam posts into corresponding holes as shown. Insert 3 cam locks into the cam lock
holes on Shelf G, use a phillips screw driver to turn cam locks clockwise to secure cam posts.
Attach 1 Panel F to Shelf G and fix it with cam locks. Assemble the remaining Panel F, G and Panel H in sequence as shown
in the image below.
DO NOT over-tighten.
E
F
F
F
G
G
H
G
WORK ON A CLEAN SMOOTH SURFACE
Join Panels
H2
Insert Cam Lock
H1
Tighten Cam Lock
(a) (b) (c)
How to join 2 boards with CAM lock:
(a) Insert cam post into flat surface of a board and fix it with
a screw driver. Do not over tighten. Fit the hole in the edge
of the joining board over the cam post.
(b) Insert the cam lock into the cam hole. Be sure the
opening section on the back fits the head of the cam post.
(c) Use a screw driver to turn the cam lock clockwise so it
locks onto the head of the cam post. Do not over tighten.
Tool Needed:
Phillips Screwdriver
PARTS LIST
No. Qty.
Description
Qty.
Description
Side Panel-Left
Bottom Panel
Top Panel
A
1
B1
C
1
1
H2
56
Cam Post
Back Panel
D
1
Vertical Panel - Front
E
1
H1
2
Cam Lock
Vertical Panel - Middle
F
3
H4
Caster with Brake
16
Caster
G
Side Panel-Right
B2
1
No.
3
H3
H5
H6
56
2
10
Wood Screw and Washer
Wood Screw
H
I
1
1
Shelf
Shelf
Front Panel
ASSEMBLY INSTRUCTIONS
1 of 3
V21.06
2 people
are required
RWDRYERS5 - Roll and Write 5 Tier Book Display with Dry Erase Board