Displays2go PPLNNSTSML Assembly Instructions Download Page 1

Page: 1 / 2

ASSEMBLY INSTRUCTIONS - PPLNNSTLRG

PARTS LIST

A. Leg

B. Middle Connector

C. Wood Countertop

D. Top Wood Table

E. Top Table Connector

F. Screw

G. Hex Key

H. Wood Screw

I. Screw Driver

X14

Step 3. Lay Top Wood Table (D) on a clean, smooth

surface (the side with pre-drilled holes facing up).

Align holes on Top Table Connector (E) with holes at

bottom of Wood Table-top. Insert and tighten (8)

Wood screws (H) using provided screw driver (I).

Step 1. Assemble (2) Legs (A) with Middle Connec-

tor (B) by fastening (2) screws (F) from both sides.

Use Hex Key (G) provided within the package.

Step 2. Flip over the assembled leg frame in Step 1,

and connect it to the bottom of the Wood Counter-

top (C) with (4) screws (F) as shown in picture below.

Step 4. Flip over the assembled parts in Step 3. Align

holes in Top Table Connector (F) with pre-drilled

holes on Wood Countertop (D).

Insert (3) Wood screws (H) on each mounting plate

on Top Table Connector. Tighten all Wood Screws

with the provided phillips screw driver (I).

Summary of Contents for PPLNNSTSML

Page 1: ...d tighten 8 Wood screws H using provided screw driver I Step 1 Assemble 2 Legs A with Middle Connec tor B by fastening 2 screws F from both sides Use Hex Key G provided within the package Step 2 Flip...

Page 2: ...B by fastening 2 screws D from both sides Use Hex Key G provided within the package Step 2 Lay Wood Table C on a clean smooth surface the side with pre drilled holes facing up Place the assembled leg...