1
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF
YOU DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN FOLLOW
THEM SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE HONOURED IF
ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE INSTRUCTIONS HAVE
BEEN FOLLOWED EXACTLY.
· The HVAWM4290L is designed to mount a panel onto a vertical wall. Hardware for mounting to
a wood stud is included. For mounting to any other surface, it is recommended you contact a
qualified contractor.
· The wall or mounting surface must be capable of supporting the combined weight of the mount
and the display, otherwise the structure must be reinforced.
· Safety gear and proper tools must be used. A minimum of two people are required for this installation.
Failure to use safety gear and/or attempting this installation alone can result in property damage,
serious injury, or death.
·
Follow all instructions and recommendations regarding adequate ventilation and suitable locations for
mounting your flat panel. Consult the owner‘s manual for your flat panel for more information.
·
This product will hold flat panels up to 90” and weighing up to 200 lbs.
·
VESA 800mm x 600mm
Tools Required
· Stud finder ("edge to edge" stud finder is recommended)
· Phillips screwdriver
· Pencil
· Hammer Drill (Concrete installation only)
· 1/4" drill bit for wood studs, 3/8” drill bit for concrete
· 7/16" socket wrench or bit driver for wood screws
· Level
· Tape measure
INSTRUCTIONS
HVAWM4290L
Parts List
Wall Plate (x1)
Adaptor Plate (x1)
Adaptor Brackets (x2)
Slider Plates
(x4)
Anchor (x4)
Spacers (x4)
Allen Key (x1)
M5*15mm
(x4)
M5*25mm
(x4)
M6*12mm
(x8)
M6*25mm
(x4)
M8*15mm
(x4)
Lag Bolt
8*70mm (x4)
A
M8*15mm
(x4)
B
M8*30mm
(x4)
C
Metal Washer
φ
8mm (x4)
D
Metal Washer
φ
6mm (x8)
E
F
G
H
I
J
K
L
M
N
