1.
Take
Screen and insert into brackets making sure
the screen hits the bottom of the brackets
shown
below
.
4
.
Remove
screw A
and replace with screw and
spacer provided in the kit
. Re
peat steps for screws
B,C, and D.
Only screw half way.
PARTS LIST
Front
Panel
X1
Back Panel
X
1
Open all boxes first and layout all parts on a level and sturdy floor. Reference parts list to verify that all parts
and hardware are present.
Before you begin, read instructions thoroughly prior to assembly. 2 people are required for the installation.
ASSEMBLY INSTRUCTIONS
Rev.
19.10
1 of 2
Screws
X
6
Spacers
X
4
21.5" Screen X1
5
. Remove screw E and replace with a screw
from kit.
Repeat step for screw F. Only screw halfway.
Zip tie X1 and Zip tie
holder X1
2. Next tie the IR cable to the zip tie holder using the
zip tie
shown in the images below
. Make sure it is
secure
d tightly.
3. Peel bottom of zip tie holder to stick to front panel
and place IR over hole like the images below.
SMABLCD
- DIGITAL SCREEN MASTER SKU: FRMRCKWT66DS