1. Connect rear leg (C), wood block (E) and top rail (D) with
metal pin (F), see the image below.
Secure the wood block by using wood screws (J) with a
Phillips screwdriver.
E F D
C
2. Connect 1 front leg (A) with the assembled rear leg.
Unscrew and insert the lock nut (L) into the pre-drilled hole
on the top rail, tighten the screw (L) from the side with
provided hex key (M).
J
A
L
PARTS LIST
A. Front Leg - Right
B. Front Leg - Left
C. Rear Leg
D. Top Rail
E. Block
F. Pin
G. Bottom Rail
H. Canvas Shelf
I. Secure Bar - Shelf
J. Wood Screw
K. Screw with Wing Nut
L. Hex Screw with Lock Nut
M. Hex key
X1
X1
X1
X1
X1
X1
X1
X1
X1
X3
X2
X4
X1
IMPORTANT SAFETY INFORMATION:
Read all instructions before start installing the unit. Displays2go is not responsible for any damage or injury
caused by incorrect assembly or use.
A
B
C
D
E
F
I
J
G
H
K
M
L
TOOLS NEEDED
- Flat-head Screwdriver
- Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
Ver. 12/18
ARTSNFF6 - Wooden Easel with Shelf
1 of 2
Tips: Adjust the lock nut with a flat head screw driver to help
threading in the hex screw.
