Talk Button
Microphone
Power/Volume Knob
Getting Started
Turning Power On/Off
Speaking
Installing the Batteries
Battery Installation
FR-210 IB_back Printing color: Black Oct. 13, 2014
Note:
Batteries should always be installed by an adult.
Use a Phillips screwdriver to open the battery
compartment door located on the back of the unit.
Insert 4 AAA (R03) batteries into each 2-Way
Radio with + and - terminals as indicated in the
compartment.
Replace the compartment door and tighten the
screw with a Phillips screwdriver. Do not
over-tighten the screw.
• Turn
Power/Volume Knob
right (clockwise) to turn
on the 2-Way Radios. The Power LED will light to
indicate unit is ON.
•
Both
2-Way Radios must be turned on in order to
send and receive messages.
• Turn
Power/Volume Knob
left (counter-clockwise)
to shut off the 2-Way Radios.
For the Best Possible Performance
• Only use the recommended/supplied batteries or
equivalent.
• Use alkaline batteries for longer life.
• Do not mix old and new batteries, and do not mix
alkaline, carbon-zinc or rechargeable nickel-cadmium
batteries.
• Insert batteries with proper polarity (+/–) as indicated.
• Remove exhausted batteries from product.
• Recharge rechargeable batteries under adult
supervision.
• Do not attempt to recharge non-rechargeable
batteries.
• Do not open batteries or heat them beyond normal
ambient temperatures.
• To prevent battery leakage or damage remove
batteries from a product if it will not be used for a
month or longer.
• Use extreme caution handling leaking batteries
(avoid direct contact with eyes and skin). If battery
leakage comes in contact with eyes, IMMEDIATELY
flush the eye with lukewarm and gently flowing water
for at least 30 minutes. If skin contact occurs, wash
skin with clear water for at least 15 minutes. Seek
medical attention if any symptoms occur.
• Store in cool, dry, ventilated area away from
hazardous or combustible material.
• Do not dispose of batteries in the household trash or fire.
• Follow applicable laws and local regulations for the
disposal and transportation of batteries.
Press and hold the
Talk Button
while speaking into
the Microphone. Release
Talk Button
to listen. Adjust
volume using
Power/Volume Knob.
You Should Know
For clear transmission, keep the antenna pointing
upwards and the microphone approximately two
inches from your mouth.
Speaker
Power LED
2-Way Radios can be used for all kinds of fun games
and activities. Here are two suggestions:
Hide and Seek
Just like regular Hide and Seek, but with a twist: the
“Hider” can send clues to the “Seeker” using the 2-Way
Radios.
Mystery Sounds
Can you recognize the mystery sound? One kid sends
a sound over the 2-Way Radios, while another tries to
guess what the sound is. Examples can include an
animal, song, TV show, or anything else!
It is important to keep the 2-Way Radios as dry and clean
as possible. You may clean the cabinet with a cloth or
sponge moistened with mild soap and water. Do not
attempt to use strong cleansers or solvents, as they may
cause damage.
Listening
Playing Games
Maintenance
Questions or Comments
• Both 2-Way Radios must be turned on and have
their antennas pointing upwards in order to send
and receive messages (speak and listen).
• Messages cannot be received while the
Talk
Button
is being pressed. Release the
Talk Button
to listen.
• Messages can be heard through the Speaker.
• For questions or comments regarding this or other
KIDdesigns products, please call our toll-free
number:
1-888-TOP-TOYS
Also visit our website:
www.kiddesigns.com
If you experience any of the following problems please
insert 4 fresh new AAA (R03) batteries into each unit.
1. If one or both of the 2-Way Radios do not work, this
may indicate that the batteries are weak.
2. If the signal range of the 2-Way Radios decreases
notably, this may indicate that the batteries are weak.
Please keep in mind that this product does not transmit
well through obstacles such as trees, buildings, and
metal structures.
If there is a sizable increase in static, it may be due to
the proximity of electric motors, fluorescent lights, power
lines, or other signal-disrupting objects. You may have
to change your location.
If problems persist, DO NOT ATTEMPT TO REPAIR
THE UNIT. See the Warranty for factory services.
Troubleshooting
