TR-40CRA D
IGITAL
-
TO
-A
NALOG
TV C
ONVERTER
T
ROUBLESHOOTING
Page 19
Troubleshooting & Reference
Solving Common Problems
CHAPTER 5
T
ROUBLESHOOTING
If you experience a problem while using your TR-40CRA Digital-to-Analog TV
Converter, review these troubleshooting tables. Look under the
Symptom
column, and find a description that matches your problem. Then, follow the
steps for that issue under
Troubleshooting Steps
.
Symptom
Troubleshooting Steps
The remote
control doesn’t
work.
1
Verify the batteries are installed according to the battery
diagram on the remote control.
2
Try changing batteries in the TR-40CRA remote control.
3
Make sure you are pointing the remote control directly at
the front panel of your TR-40CRA converter. The remote
control uses infrared (IR) signals to operate the TR-
40CRA, and must have line of sight to the TR-40CRA
converter.
The TR-40CRA
converter won’t
turn on.
1
Ensure the power cord for the TR-40CRA converter is
plugged into a working electrical outlet.
2
Ensure the power cord is plugged fully into the TR-
40CRA power converter port.
3
Put new batteries in your TR-40CRA remote control, and
try pressing POWER on the remote control.
4
Try plugging the power cord for the TR-40CRA converter
into a different electrical outlet.
tr40.book Page 19 Thursday, August 14, 2008 12:47 PM
