Discount Car Stereo VOL-HF, Quick Start Installation Manual

Page: 7 / 11

20. Plug control/microphone (See Fig .
Fig . Fig .
Fig . 20
20 20
20) to Bluetooth Module
input labelled “MI” (See Fig. Fig. Fig. Fig. 23 23 23 23)
Fig. Fig. Fig. Fig. 20 20 20 20
Control button/Microphone
21. Consider where to install control/mic button. Keep in mind
the control button must be within reach of the driver and
facing driver for voice commands and phone dialog (cable is
6ft. long).
We recommend completing the rest of the install We recommend completing the rest of the install We recommend completing the rest of the install We recommend completing the rest of the install prior prior prior prior
to securing the control/mic button to the dash
to securing the control/mic button to the dash to securing the control/mic button to the dash
to securing the control/mic button to the dash
.
. .
. Once you decide
on a location simply remove tape backing from control /mic
button
Make sure no ventilation duct is pointed towards the mic.
It is best to mount button facing driver
Your Bluetooth Module includes a USB Charging port. Should you
decide to use it, we suggest one of 3 connecting options:
A . Flush
Flush Flush
Flush to dash/panel
to dash/panel to dash/panel
to dash/panel requires drilling a ¾” hole in the dash
requires drilling a ¾” hole in the dash requires drilling a ¾” hole in the dash
requires drilling a ¾” hole in the dash
B . Flush Flush Flush Flush with Support with Support with Support with Support bracket bracket bracket bracket (use this option to mount USB
terminal wherever your installation demands without drilling)
C . No USB Mount
No USB Mount No USB Mount
No USB Mount---- (default)
A.
A. A.
A.
Flush to Dash or Panel Flush to Dash or Panel Flush to Dash or Panel Flush to Dash or Panel
(drilling
(drilling (drilling
(drilling
required) required) required) required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or
equivalent (See Fig. Fig. Fig. Fig. 21 21 21 21)
Fig. Fig. Fig. Fig. 21 21 21 21
Step drill bit
2.
Insert the 3ft. USB cable male terminal (See Fig.
Fig. Fig.
Fig. 22
22 22
22)
through the ¾” hole created in step 1 and connect to USB
port on Module (See Fig. Fig. Fig. Fig. 23 23 23 23)
Fig. Fig. Fig. Fig. 22 22 22 22
Flush mount 3 ft. USB cable