Pairing
The pairing process varies between devices but the basic steps are the same.
This process is done upon initial install and will not have to be repeated
1.
Turn Ignition and r
adio “ON”
LED inside adapter will flash (pairing mode)
2.
On A2DP device: Go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Then select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for the Bluetooth device name to appear and select it. (See below)
LED inside adapter will glow steady
Operation
1.
Turn ignition
to “ACC”
and radio
“ON”
2.
Press
“
MODE
”
button on radio to enter changer mode. Radio will
display Disc1 Track 1 as seen in
Fig. 3
Fig. 3
3.
Launch Smartphone or Tablet audio application and verify device
volume is set to at least 80%
4.
Turn radio volume control button to set the playback level.
Warning:
Playlist and track selection *NOT* possible from radio
buttons. Use smartphone built-in controls and display to access and
control audio files and applications
5.
If correct operation is confirmed go ahead and reinstall radio.