2.
Connect XM 16-pin plug (See
Fig. 3
) to harness 16-pin connector (
See
Fig. 4)
Fig. 3
16-pin plug
Fig. 4
16-pin connector
3.
Connect harness 16-pin plug (See
Fig. 3
) to XM module 16-pin
connector vacated in step 1
4.
Carefully route audio jack (See
Fig. 5
) to location on dash or nearby
panel where it will be mounted (within 4, 6 or 10 ft.) Location will vary
based on vehicle and customer’s preference.
Audio Jack (active XM)
Audio jack (expired XM)
Fig. 5
5.
Optional:
Drill a ¼” hole in dash
or panel, push shaft through hole and
secure with nut (See
Fig. 6
)
Fig. 6
Warning:
Jack may be left freestanding, but to be mounted, ensure
panel is
no thicker than 1/8”
otherwise shaft may not protrude enough
to engage with nut. If necessary, use dremel, sander etc. to thin panel,