3.
Route audio cable plug to where audio device will reside (within 3 ft.)
4.
Proceed to installation step 3 below.
Fig. 14
Audio cable
Fig. 15
Module
5.
Remove tape backing and attach microphone mounting bracket to
headliner, sun visor etc.; route cable down pillar, under dashboard
toward module location and connect to module “MIC” input. (See
Fig.
15
)
Wind noise (Convertibles) will negatively affect phone audio. Users are
advised to install microphone away from wind/ventilation ducts etc. or
opt for button microphone seen in
Fig. 16a
Visor microphone
Fig. 16
Optional button Microphone
For added installation flexibility, we offer optional button microphone. (See
Fig.
16a
). Adding this option replaces visor microphone shown in
Fig. 16
).
To install, c
onnect 1/8” plug to Module
CTR/MIC
input jack (See
Fig. 15
) and
route button to front of the dash, clean area with alcohol, remove tape backing
and attach to dash (cable is 6ft. long).
We recommend testing mic audio from
multiple dashboard locations prior to finalizing install.
Fig. 16a
