Operating Instructions
DISAG RM IV
Operating Instructions DISAG RM IV Seite 6
1.
General
The
DISAG RM IV
ring and score measuring machine is a fully automatic target evaluation
unit for all the usual air rifle, air pistol, small bore, gallery rifle and running target targets
and bands up to 225 mm in width.
The following are used as abbreviations:
AR
–
air rifle
AP
–
air pistol
SB
–
small bore
GR
–
gallery rifle
RT
–
running targets
S1 to S5
–
special targets 1 to 5
Maximum 2 shots per target can be evaluated in the case of air rifle targets. Maximum 5
hits per target can be evaluated as far as air pistol, small bore, gallery rifle and the special
targets S1 to S5 are concerned. Shown in the case of running target cards are one shot
per target. Should several shots hit the target then these scores are marked by the suffix
"*" as symbol.
The machine is operated by means of a display and keyboard. Connection to an
evaluating computer is possible through RS 232 and USB interfaces. The scores can be
printed directly on the target by means of the built-in printer.
Insert Target on the left side
Open up Cover
Keyboard
Display
Back : PC Connector and
Power supply
Figure 1: DISAG RM IV overview
We would ask you to please read these operating instructions before putting the machine
into
commission for the first time
. If you want to refer to some aspects when using the
machine later please use the
keyword register
at the end of these instructions.
Your DISAG/KE Team wishes you every success and enjoyment in your competitions.
