Operating Instructions
DISAG RM IV
Operating Instructions DISAG RM IV Seite 15
5.1
ESC key
The ESC key serves to break off an entry. It is also possible to break off an ongoing
process by means of this key "selection of type of target", for example. The transport
rollers are to be switched off again by means of this key should they have been started
using the ARROW KEYS.
Menues are left with the ESC key after the system has been set by means of the 1/10 ring
or DFC keys.
5.2
SERIES key
The SERIES key enables the actual series of scores to be displayed and the evaluation of
the series to be selected. If one series has already been set then the actual results of the
series will be displayed.
Series: 5 of 10
Tot. 46 Rings
If the SERIES key is pressed once again the required evaluation of the series can be
selected by means of the ARROW KEYS:
No series
10-shot series
20-shot series
30-shot series
40-shot series
60-shot series
Special series.
Should "no series" have been set at the beginning, then direct access is given to the
selection menu. The special series key enables you to enter your own series.
Selection of the required series is confirmed by means of the ENTER key. This setting is
not
retained when the unit is switched off. To store a set series permanently
see
"machine configuration".
A not completely shot series can be deleted with the CLEAR key after pressing the
SERIES key.
