40
3 Filling the tanks
3.2
Filling the disinfectant tank
1.
Put the appliance into the neutral position,
Z
Chapter
4.6, “Putting the device into the neutral position”
.
2.
Hold the appliance firmly by the carrying handle and pull
the disinfectant tank up and out of the console (Fig. 13).
3.
Twist the tank cap anti-clockwise and take it completely
off the disinfectant tank (Fig. 14).
4.
Pour in the undiluted disinfectant carefully into the dis-
infectant tank no higher than just under the filling noz-
zle.
5.
Screw the tank lid back onto the disinfectant tank fully
(Fig. 14).
6.
Push the disinfectant tank powerfully back into the con-
sole (Fig. 15).
WARNING:
Health hazard! Only use the disinfectant supplied or
ordered from us. The device has been designed for and
tested with this disinfectant. Do not mix this disinfectant.
Other products may make using the appliance unsafe.
WARNING:
Health hazard! Always make sure you store the disinfect-
ant in a place that is inaccessible to children, particularly
after filling the disinfectant tank and before steam clean-
ing.
NOTE:
If you do not have any original disinfectant available, sim-
ply leave the disinfectant tank empty. You can still steam
clean with the steam mop normally. In this case, set the
disinfectant regulator (Fig. 1/19) to ‘OFF’.
NOTE:
If the optional refilling container (Fig. 1/20*) is included in
the scope of delivery, only use it to safely fill the tank with
disinfectant. When the disinfectant tank is empty, the
content of a refilling container filled to the MAX mark fits
into the disinfectant tank.
NOTE:
Also observe the instructions on the disinfectant bottle.
13
Disinfectant
14
15
02_M318_gb.book Seite 40 Montag, 21. März 2011 1:15 13
