36
2 Assembly
2.2
Assembly
1.
Place the steam base on a flat surface.
2.
Screw the pre-installed cross-head screw out of the
adapter on the steam base using a cross-head screw-
driver (Fig. 2).
3.
Push the central console powerfully into the adapter on
the steam base as far as it will go.
4.
Screw the cross-head screw you just took out into the
hole provided (Fig. 4). Tighten the screw by hand.
NOTE:
The hole in the adapter must be visible through the hole
of the central console (Fig. 3). Otherwise, it will not be
possible for the screw to engage fully.
2
3
4
02_M318_gb.book Seite 36 Montag, 21. März 2011 1:15 13
