33
1 Safety instructions
GB
1.5
Concerning the power
supply
The appliance is operated with electrical power which
means there is always a risk of electric shock. So please
observe the following in particular:
- Make sure that the steam base is always on the sur-
face to be cleaned during operation. Never lay the de-
vice on its side or operate it in the air! Otherwise,
liquid could flow into the engine and cause a short cir-
cuit!
- Keep the steam base away from the power cord when
in operation. power cords must not come into contact
with any sources of heat or damp. Otherwise there is
a danger of the power cord getting damaged which
could lead to an electric shock.
- Always pull directly on the plug if you want to discon-
nect the appliance from the mains. Never pull on the
power cord. Never carry the appliance by its power
cord. It could get damaged.
- Always completely uncoil the power cord before use.
Take care that the power cord is not bent, pinched, or
rolled over and ensure it does not come into contact
with heat sources.
- Never immerse the appliance in water or other liquids;
keep it away from rain and moisture. Never touch the
plug with wet hands.
- Only operate the appliance if your mains voltage is
the same as that indicated on the appliance’s type
plate. The wrong voltage can destroy the appliance.
- Only connect the appliance to 3-pole safety sockets.
- If possible, do not use extension cords. If you must
use an extension cord, use only safety-certified, wa-
ter-protected single extension cords (no multi-socket
distributors) designed for the high power consumption
of the appliance.
- Always check the power cord for possible damage be-
fore using the appliance.
- Pull the plug from the socket immediately after use.
Before cleaning or performing maintenance on the
appliance, ensure that the plug has been removed
from the socket.
02_M318_gb.book Seite 33 Montag, 21. März 2011 1:15 13
