background image

21

Wireless Information

This device has an open-air line-of-sight transmission distance of 25m which complies 
with the Z-Wave standards. Performance can vary depending on the amount of objects in 
between Z-Wave devices such as walls and furniture. Every Z-Wave device set up in 
your network will act as a signal repeater allowing devices to talk to each other and find 
alternate routes in the case of a reception dead spot.

Radio frequency limitations:
1. Each wall or object (i.e.: refrigerator, bookshelf, large TV, etc) can reduce the 

maximum range of 20m by up to 20 to 30%.

2. Plasterboard and wooden walls block less of the radio signal then concrete, brick or 

tile walls which will have more of an effect on signal strength.

3. Wall mounted Z-Wave devices will also suffer a loss of range if they are housed in 

metal junction boxes which could also reduce the range by up to 20 to 30%.

Maintenance

1. Do not expose your unit to dust, strong sunlight, humidity, high temperatures or 

mechanical shocks.

2. Do not use old and new batteries together as old batteries tend to leak.
3. Do not use corrosive or abrasive cleansers on your unit.
4. Keep the unit dust free by wiping it with a soft, dry cloth.
5. Do not disassemble your unit, it contains no user-serviceable parts.

Summary of Contents for ZXT-120





























Reviews: